OCEAN Irrigation brochure
Pivot structures, spray heads and pressure regulators, UMC gear motors and couplers, with our design, installation and after-sales support.
Sultanate of Oman · Islamic Republic of Mauritania
We design, build and commission.
Slaughterhouses, meat cold stores, wastewater and biogas systems, steel structures and centre-pivot irrigation, from the first 3D model to a plant that runs.
35+years of experience through our founders and technical teams
2countries: Oman and Mauritania
7engineering disciplines under one team
90%+spray uniformity on our pivot irrigation systems
Who we are
One team, from the drawing board to the working plant
OCEAN Engineering & Investment develops and delivers integrated engineering, industrial and environmental projects, backed by a multidisciplinary team.
Our strength is our team's experience in engineering design, steel structures, modern slaughterhouses, chilling and freezing, wastewater and waste treatment, and turning organic waste into biogas.
We start by studying each project's needs and preparing concepts and technical designs, then coordinate supply, fabrication and installation through to construction and fit-out, with close attention to quality, safety, operating efficiency and the environment.
- 3D design & engineering studies
- Fabrication, supply & installation
- Quality, safety & hygiene
- Environmental sustainability
35+years of hands-on experience, including major agricultural projects in Sudan
Tour our site
Walk through a slaughterhouse complex, step by step
Scroll on. The film beside each chapter plays on its own and changes as you move from the master plan to the production line.
-
01 / 05
The master plan
Every project starts as a complete 3D model. Buildings, livestock pens, roads, parking and loading areas are planned together before any steel is cut.
- 3D site model
- Layout & access
- Loading areas
-
02 / 05
Livestock pens
Shaded steel pens with concrete feed troughs and painted railings keep the animals in good condition before processing.
- Steel shade structures
- Feed troughs
- Railings
-
03 / 05
Rotary restraining box
Fabricated in the workshop and tested on site, the rotary box holds each animal safely and steadily at the start of the line.
- Workshop fabrication
- Site testing
- Safe handling
-
04 / 05
The slaughter line
Overhead rails, bleeding stations with stainless-steel troughs and lifting platforms carry each carcass through dressing and splitting.
- Overhead rails
- Bleeding station
- Lifting platforms
-
05 / 05
Conveyor & processing
Powered overhead conveyors move carcasses through hygienic processing halls with stainless-steel worktables, on their way to chilling and storage.
- Powered conveyor
- Stainless worktables
- On to cold storage
Site tour
Watch the full slaughter-line tour
3D fly-through of the complex
What we deliver
One partner across the whole chain
From the steel frame to the pivot in the field, our solutions connect. Pick a stage to see what we do there.
Engineering design & steel structures
Concepts, 3D models and technical drawings, then hangars, warehouses, livestock sheds and industrial buildings fabricated and erected to specification.
- 3D modelling of the whole site
- Steel frames, roof trusses and shade structures
- Coordination between disciplines
Modern slaughterhouses
Complete slaughter lines for cattle and small ruminants, from restraint and bleeding to dressing, splitting and processing.
- Rotary restraining boxes
- Overhead rails and powered conveyors
- Stainless-steel platforms and worktables
Meat chilling & freezing stores
Chilling and freezing rooms of every size, with insulated panels, industrial refrigeration and precise temperature and humidity control.
- Carcass chillers and freezer stores
- High-efficiency sandwich panels
- Monitoring with alarms
Wastewater treatment & biogas
Treatment plants sized to each slaughterhouse, and anaerobic digestion that turns suitable organic waste into renewable energy.
- Blood, fat and solids removal
- Physical, chemical and biological treatment
- Treated water reuse and biogas
Centre-pivot irrigation
Supply, installation and support of pivot irrigation systems, hydraulic networks and pumps, with farm machinery and technical supervision.
- Hot-dip galvanised pivots
- UMC drive trains and booster pumps
- 24-hour after-sales response
Slaughterhouse engineering
Built for hygiene, speed and safe handling
Real photos and films from our slaughter lines. Hover over a film to preview it, or open any picture in full size.
- Rotary restraining boxFabricated in our workshop, tested on site.
- Overhead rails & conveyorsPowered lines that move every carcass.
- Bleeding & dressing stationsStainless-steel troughs and platforms.
- Processing hallsWorktables, conveyors and washable floors.
Conveyor and work platforms along the line
Rotary restraining box installed on site
Splitting a carcass from a lifting platform
Bleeding station with a stainless-steel trough
Testing the rotary restraining box
Carcasses on the overhead rail line
Processing hall with conveyor lines
Dressing carcasses on the line
Work platforms along the overhead conveyor
Overhead conveyor in operation
Cattle dressing line in operation
Splitting a beef carcass
Processing hall with stainless-steel worktables
Slaughter hall with overhead rails and work stations
Overhead rail system in a new hall
The restraining box at the fabrication workshop
Meat cold storage
Cold chains that protect every cut
We design, supply and build meat chilling and freezing stores that protect quality and safety, extend shelf life and run efficiently.
Rooms of every size and capacity, with high-efficiency insulation, industrial refrigeration units and precise control of temperature and humidity, matched to the products stored and the demands of the food supply chain.
Our solutions also cover chillers for hanging carcasses, meat preparation and handling areas, loading and unloading, and monitoring that keeps conditions stable throughout storage.
Fresh meat chilling rooms
Chilled meat held at the right temperatures, in line with health requirements.
Meat freezing stores
Long-term freezing, designed around the products and capacity required.
Carcass hanging systems
Fittings for hygienic, efficient storage and handling.
Insulation panels
Sandwich panels that cut heat loss and energy use.
Industrial refrigeration
Units sized for the performance and reliability you need.
Control & monitoring
Temperatures tracked, with an alarm when limits are crossed.
Design & build
Study, supply, installation and commissioning in one contract.
Planning a cold store?
Tell us the products, capacity and location, and we will propose a solution.
Request a Quote
Wastewater & waste treatment
Turning slaughterhouse waste into clean water and energy
We design and build systems that treat the wastewater from slaughter, processing and cleaning, and put organic waste to work as biogas.
Water lineFrom wastewater to reuse
- Blood & fat removalRecovered at source
- Suspended solidsScreened and separated
- Physical-chemicalTreatment stage
- BiologicalTreatment stage
- Treated water reuseTo the required quality
Energy lineFrom organic waste to power
- Organic wasteFrom slaughter operations
- Sludge treatmentStabilised and reduced
- Anaerobic digestionBiodegradable fraction
- BiogasRenewable energy, less waste to dispose of
Treatment plant design
Sized to the slaughterhouse's capacity and its wastewater.
Organic waste treatment
Managing slaughter waste and safely recovering resources.
Biogas production
Anaerobic digestion that turns waste into energy.
Treated water reuse
Reuse for suitable purposes once quality is met.
Environmental management
Less pollution and support for compliance.
Waste is not just an environmental burden. Managed and treated correctly, it is a resource, and a traditional slaughterhouse can become a cleaner, more efficient plant.
Steel structures
From bare ground to finished pens
Follow a livestock facility through every stage of the build. Swipe or use the arrows, and hover over a film to preview it.
01
3D design of the livestock shed
02
Heavy equipment arrives
03
Preparing the land
04
The ground, levelled and ready
05
Cutting steel sections on site
06
Erecting the steel frame
07
The frame takes shape
08
Assembling the frame on site
09
Lifting a roof truss into place
10
Roof trusses along the shed
11
The shed frame nearing completion
12
Concrete feed trough with railings
13
Painted steel railings
14
The finished shaded pens
15
The completed site from the air
Al-Moheet Engineering & Investment · Mauritania
OCEAN Irrigation
Precision irrigation for abundant harvests
Centre-pivot systems that water every centimetre of land evenly: efficient, water-saving, smart and built to last.
Get the brochure90%+spray uniformity with I-WOB heads and pressure regulators
20 yrsservice life, hot-dip galvanised throughout
30%slopes climbed by the flexible truss structure
24 hafter-sales response, with a full spare-parts supply
Rotary jointSelf-lubricating three-lip joint for a high load and smoother rotation.
Control panelRemote control from a phone, automatic restart after a water or power cut, works through the night.
Water inletFeeds the pivot from the pump and hydraulic network.
Robust centre pivotReinforced 100 × 100 mm angle-steel legs, hot-dip galvanised.
Why choose OCEAN
Engineered for the field, ready for the future
Built to resist
Hot-dip galvanised from end to end, unafraid of humidity or salinity, for a life of up to 20 years.
Even water, higher yields
I-WOB spray heads and pressure regulators give better than 90% uniformity, so water and fertiliser reach every plant.
Any terrain
A flexible truss structure follows rolling land and climbs slopes of up to 30%.
Smart and unattended
Restarts on its own after a water or power cut, is controlled remotely from a phone and works through the night.
Scale your farm
One machine covers vast areas, freeing labour and making farm management data-driven.
The power heart
UMC motors and speed reducers
The UMC motor and reducer drive every tower. They are reliable, efficient and suited to harsh conditions, which is why they are the standard choice for pivots worldwide.
95%transmission efficiency with helical gearing
126.2 N·moutput torque (40:1 reduction ratio)
28–86 rpmoutput speed, depending on model
1 & 3 phasedual voltage, for use anywhere in the world
Gearboxes
Booster pumps
Centre drives
Couplers
Choose OCEAN, choose peace of mind
With you before, during and after the sale
Before the sale
Our technicians survey your plot free of charge and prepare a planned layout for the system.
During installation
An engineer guides the installation on site, making sure every bolt is in place.
After the sale
A complete spare-parts supply and a 24-hour response service keep you running.
A pivot span over the field
Drive tower and spans at work
Galvanised spans ready for dispatch
Pipe sections in the warehouse
Stock prepared for a new project
Our team
The expertise behind every project
Our team's experience spans the engineering and technical fields that integrated projects depend on.
Engineering & design
Concepts, technical drawings and the right solution for each project.
Steel structures
Hangars, warehouses and industrial buildings.
Slaughterhouse engineering
Slaughter facilities, meat processing and animal products.
Chilling & freezing
Cold rooms, freezer stores and meat preservation.
Environmental treatment
Wastewater and slaughterhouse waste, with less impact.
Bioenergy
Using organic waste to produce biogas and energy.
Project management
Requirements, supply and construction, coordinated across disciplines.
Have a project in mind?
Tell us what you are planning, and we will propose a solution.
Request a Quote
Our vision
To be a trusted partner in integrated engineering and industrial projects, using our team's expertise and modern technology to deliver solutions of lasting value.
Our mission
To put our expertise to work on high-efficiency projects that combine quality construction, safe operation, environmental protection and our clients' goals.
Our commitment
Careful planning, effective coordination and respect for technical specifications, with solutions that fit each client's needs and each project's operating conditions.
Where we work
Two countries, one team
Engineering and fabrication from Oman, agricultural and irrigation projects in Mauritania, and experience that includes major agricultural projects in Sudan.
Sultanate of Oman
Engineering & fabrication- SalalahWorkshop · Raysut Industrial Area, Madayn 2
- MuscatHead office · Al Qurm, P.O. Box 14, P.C. 133
- BarkaRegistered place of activity · Al Hafri Al Janoubiya, South Al Batinah
Mauritania
Irrigation & agriculture- Al-Moheet Engineering & InvestmentPivot irrigation, hydraulic networks, pumps, farm machinery and technical supervision
Partnerships with regional and international manufacturers of irrigation and agricultural equipment.
Oman Chamber of Commerce and Industry
Member · Membership No. 855179
Ministry of Commerce, Industry and Investment Promotion
Commercial Registration No. 1626273 · registered 2025
Contact
Let's build your next project
Tell us about the facility, its capacity and location, and our engineers will come back to you with a proposal.
- Mobile · Oman
- +968 9124 0816
- Telefax · Oman
- +968 9191 2329
- Mauritania
- +222 2770 5181
- Oceannvst@gmail.com
- Workshop
- Raysut Industrial Area, Salalah
Send us a message
Please include the type of project, the capacity and the location.